T 1005
Fabricante:
ZMM Stomana
Especificación técnica de T 1005
| Datos técnicos | Dim. | Valor |
|---|---|---|
| Tamaño de la mesa de trabajo | mm | 1100x900 |
| Work table height from floor | mm | 850 |
| Work table openings diameters | mm | 75, 110, 160, 210, 260, 310, 360 |
| Distance btw front part of work table and spindle center | mm | 450 |
| Changeable spindle taper | Morse | 5 |
| Spindle diameter | mm | 50 |
| Spindle usable length | mm | 160 |
| Spindle vertical stroke | mm | 200 |
| Tool max diameter for profiling | mm | 275 |
| Tool max diameter for tenoning | mm | 400 |
| Tool max diameter/depth of travel under work table surface | mm | 350/100 |
| Spindle speed | min-1 | 3000/4000/5000/6000/8000/10000 |
| Integral safety guides | mm | 2x550 |
| Dust port diameter over/under work table | mm | 120/120 |
| Motor | ||
| Spindle moulder motor power - 2 speeds 3 phase | KW | 4.5/5.5 (7.5 single speed - optional) |
| Dimensiones generales | ||
| LxWxH (excl. movable control panel) | mm | 1100x1000x1120 |
| Peso | ||
| Net weight | kg | 580 |
Equpamiento estándar y accesorios
Fixed cast-iron work table with grinded surface. Changeable no-tilt spindle with Morse cone MK 5. Spindle, mounted on precision bearings for maximal spindle speed 10000 min-1. Support (protector) for the tool for profiling with maximal diameter ø275 mm. Integral safety guides with total length 1100 mm and height 154 mm. Light indication for the spindle speed. 6 spindle speeds /two-speeds motor/. Dust collection ports with diameter Ø 120 mm - under and over the working table. Electronic brake for electrodynamic stopping. Device for spindle blocking while replacement the tool. Electric blocking the start of the machine while replacement the tool through an electric cutoff switch. Vertical and horizontal clamping device. Movable control panel over the working table /at eye level/.
Optional equipment
7.5 kW single speed motor with 4000/6000/8000 RPM; Left right spindle rotation; Extension table 500x320mm; Tenoning table and hood 400mm; Spindle diameters 1 1/4",30mm, 32mm, 35mm, 40mm; Feeder MX 38 - 3 feed rollers and 8 feed speeds, Feeder MX 48 - 4 feed rollers and 8 feed speeds.